Cheshire Grin Transfers

These are a great option if you don't have a cutting machine or embroidery machine!

Just like HTV (heat transfer vinyl), these appliqués are applied with an iron or a heat press.  But unlike HTV, these come in colourful designs!
Apply them to fabric, leather, vinyl, or any material that you can apply heat to without it melting.  Use Teflon sheet or parchment paper to protect your material from direct heat. 
Apply them directly to your material, or press them onto a piece of cork and vinyl, and make your own tag!  Or use them to decorate your favourite clothing, or a canvas pencil case, or backpack, or a book cover that's made of fabric.   

I think these would look especially cool on a black background, so that from a distance, the eyes and white teeth appear to be floating! 

Sold individually.
The design measures 38mm (1.5") wide, and 25mm (1") tall
They have a matte finish.
The black background is 100% cotton woven fabric, and the turquoise background is litchi grain vinyl.  The second photo is me peeling the transfer paper off after pressing and letting cool all the way.

How to apply them:
Press the fabric to remove moisture if necessary, for 5 seconds.
You have two options- 

Hot Peel:
Temperature: 300oF (approx 149oC) / warm or wool setting on your iron
Time: Press for 15 seconds
Pressure: Firm
Press, don't slide! Keep your iron in one place while fusing.
Peel the film off as soon as you're done pressing.  Be careful when peeling to make sure the entire design has released from the transfer sheet.  If it is still on the transfer sheet, press the design for another 5 seconds.
Once peeled, you can press the design for an additional 5 seconds to increase its durability.  Use a Teflon Sheet or parchment paper to protect the design and your material!

Cold Peel: 
Temperature: 300oF (approx 149oC) / warm or wool setting on your iron
Time: Press for 10 seconds
Pressure: Medium/Firm
Press, don't slide! Keep your iron in one place while fusing.
Remove your project from the heat and lay flat to cool.  Once it is cool to the touch, gently peel the transfer sheet from the design.  If it is still on the transfer sheet, press the design for another 5 seconds.
Once peeled, you can press the design for an additional 5 seconds to increase its durability.  Use a Teflon Sheet or parchment paper to protect the design and your material!

These come packed with a small piece of parchment paper behind the design, to protect it from being scratched.  If you are going to press the design for an additional 5 seconds after peeling, you can use that piece of parchment paper on top of the design to protect it from direct contact with your iron/press (unless your material melts from heat, in which case, you will need a large protective Teflon sheet or parchment paper to protect your whole project).
Application instructions also come with each transfer, so you don't need to come back here when you're ready to apply it.

Storage Tips:
- Don't bend the transfer.  The crease may become permanently visible when applied to your project.
- Be careful not to touch or scratch the back side of the transfer. It will damage the ink of the design.
- If you are going to be storing your transfers for a long time, remove them from the bag.  Trapped humidity inside the bag could damage the ink of the design.